Bus Panel

Access to the bus panel may be obtained by the mouse-click hotspot on the main panel:

There are 85 electrical circuits controlled by the bus panel.  Each circuit is protected by a fuse. The rating of each fuse is marked on the face of the fuse holder.

To remove a fuse, simply mouse click on it.  The fuse will turn with each click.  The fuse holder will show empty when the fuse has been removed.  Once a fuse is removed, the electrical circuit will be open.  Therefore, care should be taken when removing fuses in flight, as a critical aircraft system may be terminated!

 

Copyright © 2003 by FSD International

All rights Reserved